Brand | Miller |
Model | 141 |
Input Power | 1 Phase, 120V, 20 Amps, 60 Hz |
Rated Output | 90 Amos at 18.5 VDC, 20% Duty Cycle |
Welding Amperage Range | 30-140 Amps |
Net Weight | 51 Lbs. |
Daily | $75.00 |
Weekly | $295.00 |
Four Week | $750.00 |
Min Rental Term | Day |
Millermatic® 141 MIG Welder with Auto-Set 907612
The Millermatic® 141 MIG welder is a 140 amp portable MIG welder that runs on standard 120 volt household current. The 141 features Auto-Set, which eliminates the guesswork of setting voltage and wire feed speed for your MIG welding application. Simply select the material thickness and wire diameter while the welder is in the Auto-Set mode, and you are ready to weld. The Auto-Set control automatically sets your welder to the proper parameters. It is available when welding mild steel with solid wire and only works with .024 and .030 solid wires and C25 shielding gas (75% Argon, 25% CO2).
Manual MIG welding control is also available for those welders who wish to fine tune their welding arc. Manual welding mode must also be used when MIG welding aluminum, stainless steel or for flux-cored welding. The parameter door chart lists voltage and wire feed speed settings options.
Processes
MIG (GMAW)
Flux Cored (FCAW) (gas and self-shielded)
Uses 4 inch or 8 inch (102 or 203 mm) spools and can be set up to weld with .024 to .030 inch (0.6 to 0.8 mm) solid wire and .030 to .035 inch (0.8 to 0.9 mm) flux-cored wire.